Eshop roka 2025 s vykurovacou technikou

Bostadssats EQUICOMPACT - för uppmätning av värmeenergi - Kv 2,5; Qn 1,5 m³; avstånd mellan varmeregeln 110 mm IVAR.EQCP15

Kod för översättningen: 506575SI
Inte betygsatt Information om betyg
4 391,01 kr –20 %
Vykurovacia technika Bytová sada EQUICOMPACT - k odpočtu spotreby tepla - Kv 2,5; Qn 1,5 m3; rozteč merača tepla 110mm
4 391,01 kr –20 % 3 512,86 kr / st 2 855,98 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

IVAR.EQCP15
 
  • PN 10, T = +3 °C till +90 °C
  • porositet i filternätet 500 μm
  • bostadsmätset för mätning av uppvärmningsenergi från centralnätet
  • settet innehåller: tvåvägszonsventil med termostatventil för stängning/öppning av systemet, balansventil, hålning för temperaturgivare, hålning för differenstryckregulator, 4 st kulventiler på ingång och utgång, filternät, värmedämmning och installationskonsoler
  • yttre vridfläns 3/4” M
  • material: Messing CW617N, dämmning PP

Välj tillbehör:

  • värme- och kylvärlemätare IVAR.WFM
  • elektrotermisk huvuddel IVAR.TE 3040
  • veckorumstermostat IVAR.MAGICTIME PLUS
  • rekommenderad installationslåda IVAR.P-KLASIK 1, hål för ingång/utgång måste anpassas

Vanliga frågor

  • Till vad används denna mätset? Mät- och kedjansammanställningar gör det möjligt att övervaka (och i fall av bostadssammanställningar även proportionellt uppräkna) värme- eller vattensförbrukningen i en viss cirkulation eller lägenhet.
  • Måste installation och avläsning göras av en yrkesman? Ja, installationen av mätset och dess eventuella officiella kontroll/kalibrering (vid fakturamätning) måste utföras av en person med rätt behörighet.

Ytterligare parametrar

Kategori: lägenhetsmätset EQUICOMPACT - för avläsning av värmeförbrukning
Tillgänglighet: I lager eller hos leverantören
Senaste prisuppdatering: 13.04.2026 1:03:26

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

S Författarens avatar 02.11.2026 22:23
Could you kindly confirm whether this EQUICOMPACT set is compatible with the IVAR.WFM heat meter, and whether the electrothermal actuator and room thermostat must be purchased separately, or are they already included in the delivered set?
A Författarens avatar 02.11.2026 22:23
The heat meter, actuator and thermostat are not part of the basic set - the EQUICOMPACT set itself contains the 2-way zone valve, balancing valve, sensor pockets, ball valves, filter and insulation. The IVAR.WFM meter, IVAR.TE 3040 actuator and IVAR.MAGICTIME PLUS thermostat are all designed to work with this set and can be added as optional accessories on top of it. Just keep in mind the official calibration/installation still needs to be done by someone with the proper authorization.
C Författarens avatar 19.10.2026 16:56
Does this set fit apartments with 110mm spacing between connections, and can I install the heat meter myself?
A Författarens avatar 19.10.2026 16:56
Yes, this EquiCompact set is designed specifically for a 110mm spacing. However, you cannot install it yourself; official verification and installation must be done by an authorized professional to ensure accurate billing.
R Författarens avatar 21.09.2026 12:25
Ahoj, mám v bytovom jadre merač tepla so roztečou 110mm – táto sada EQUICOMPACT s Kv 2,5 a Qn 1,5 m3 je priamo na to určená, alebo potrebujem ešte nejaké redukcie?
A Författarens avatar 21.09.2026 12:25
Áno, táto sada je navrhnutá presne pre rozteč 110mm, takže by mala sadnúť bez redukcií. Kv 2,5 a Qn 1,5 m3/h sú štandardné hodnoty pre bežné bytové rozvody, takže väčšinou nie je problém. Ak si chcete byť istí, odporúčame pred objednávkou overiť priemer potrubia, aby všetko sedelo na prvý krát.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.