Eshop roka 2025 s vykurovacou technikou

O-ring GAS - 54 mm (gul), IVAR.IVO.HNBR Z IVAR.IVO.HNBR Z

Kod för översättningen: I002585
Inte betygsatt Information om betyg
30,89 kr –19 %
Vykurovacia technika O-krúžok GAS - 54mm (žltý)
30,89 kr –19 % 24,73 kr / st 20,11 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

O-ringen IVAR.IVO.HNBR Z med diametern 54 mm fungerar som tätning i systemet med rör och kopplingar i rostfritt stål IVAR.PRESS GAS, som används för ledningar med naturgas, biogas och propan i gasfas. Ringen är tillverkad av HNBR och är gul.

Den är avsedd för ett maximalt drifttryck på PN 5 och temperaturer från -20 °C till +70 °C. Samma typ finns även för rör 18, 22, 28, 35, 42, 76,1, 88,9 och 108 mm.

Montering och reparation av gasinstallationer får endast utföras av en behörig fackman.

Tekniska data

ArtikelnummerI002585
TillverkareIVAR
TypIVAR.IVO.HNBR Z
Rördiameter54 mm
MaterialHNBR
Färggul
Max. drifttryckPN 5
Drifttemperatur-20 °C till +70 °C
Mediumnaturgas, biogas, propan (gasfas)
SystemIVAR.PRESS GAS (rostfritt rör)

Vanliga frågor

Vilka rör och kopplingar är ringen avsedd för?
Det är en tätande O-ring för kopplingar i systemet IVAR.PRESS GAS på rostfria rör med 54 mm diameter. För systemets övriga dimensioner tillverkas den i storlekarna 18, 22, 28, 35, 42, 76,1, 88,9 och 108 mm.

Vilka gaser och driftförhållanden passar ringen för?
För ledningar för naturgas, biogas och propan i gasfas. Maximalt drifttryck är PN 5 och drifttemperaturen -20 °C till +70 °C.

Måste monteringen utföras av en fackman?
Ja, ringen ingår i en gasinstallation, som endast får monteras och repareras av en behörig person med erforderlig auktorisation.

Ytterligare parametrar

Kategori: IVAR.IVO.HNBR Z - O-ring GAS
Garanti: 2 år
Tillgänglighet: I lager eller hos leverantören
Artikelnummer: I002585
Tillverkare: IVAR
Typ: IVAR.IVO.HNBR Z
Rördiameter: 54 mm
Material: HNBR
Färg: gul
Max. drifttryck: PN 5
Drifttemperatur: -20 °C till +70 °C
Medium: naturgas, biogas, propan (gasfas)
System: IVAR.PRESS GAS (rostfritt rör)

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

R Författarens avatar 26.10.2026 09:15
Ho bisogno di sostituire un guarnizione su una rete a gas naturale, questo anello da 54 mm in HNBR è compatibile con pressioni fino a PN10 e temperature tra -20 e +70 gradi?
A Författarens avatar 26.10.2026 09:15
Sì, l'Anello O GAS da 54 mm in materiale HNBR è appositamente progettato per reti di distribuzione del gas naturale, biogas e propano liquido. Rispetta i requisiti di pressione massima PN 10 e lavora correttamente nell'intervallo di temperatura da -20 °C a +70 °C indicato nelle specifiche. Se ha dubbi sul suo impianto specifico, può contattarci descrivendo il sistema prima dell'acquisto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.