PRESS-böj 90° PPSU med en insticksända IVAR.KZ PPSU – 20 × 20 mm
Kod för översättningen: 82820220Detaljerad beskrivning av produkten
PRESS-böj 90° PPSU med en insticksända IVAR.KZ PPSU 20 × 20 mm (82820220) förbinder två presskopplingar på liten yta. Den är avsedd för flerskiktsrör ALPEX, TURATEC och PEX med samma diameter 20 mm och används både för dricksvatten och värme.
Tillverkarens uppgifter
- arbetstryck PN 10, temperaturområde +3 °C till +95 °C
- material: kropp av PPSU (polyfenylsulfon), presshylsa av rostfritt stål AISI 304, O-ring EPDM, låsring av polykarbonat
- radiell pressning med B/F-käftar Ø 20 mm
- mått enligt databladet: L1 = 39 mm, L2 = 42 mm, Z1 = 14 mm, vikt 17 g
- hygiengodkännande för dricksvatten (enligt tillverkaren)
Montering
Följ tillverkarens anvisning för att skarva flerskiktsrören ALPEX, TURATEC och PEX med presskopplingarna IVAR.PRESS. Om fogen inte pressas läcker den vid tryckprovning i området 1 till 6,5 bar, så en uteblivan pressning avslöjas av vattenläckage.
Tekniska data
| Artikelnummer | 82820220 |
| Tillverkare | IVAR |
| Typ | IVAR.KZ PPSU |
| Produkttyp | PRESS-böj 90° PPSU med en insticksända |
| Dimension | 20 × 20 mm |
| Anslutningsbara rör | ALPEX, TURATEC, PEX (samma diameter) |
| Material | PPSU, hylsa rostfritt AISI 304, O-ring EPDM |
| Max. tryck | PN 10 |
| Temperatur | +3 till +95 °C |
| Presskäftar | B/F Ø 20 mm |
| Mått L1 / L2 / Z1 | 39 / 42 / 14 mm |
| Vikt | 17 g |
Vanliga frågor
För vilka rör används 82820220?
För flerskiktsrör ALPEX, TURATEC och PEX med samma diameter 20 mm.
Vad betyder ”en insticksända”?
Böjen förbinder två presskopplingar på liten yta; den ena änden är en insticksända.
Är fogen tät utan pressning?
Nej, en opressad fog läcker vid tryckprovning i området 1 till 6,5 bar, så en glömd pressning avslöjas.
Ytterligare parametrar
| Kategori: | vinklar press 90° - PPSU |
|---|---|
| Garanti: | 2 år |
| Vikt: | 0.017 kg |
| Artikelnummer: | 82820220 |
| Tillverkare: | IVAR |
| Typ: | IVAR.KZ PPSU |
| Produkttyp: | PRESS-böj 90° PPSU med en insticksända |
| Dimension: | 20 × 20 mm |
| Anslutningsbara rör: | ALPEX, TURATEC, PEX (samma diameter) |
| Material: | PPSU, hylsa rostfritt AISI 304, O-ring EPDM |
| Max. tryck: | PN 10 |
| Temperatur: | +3 till +95 °C |
| Presskäftar: | B/F Ø 20 mm |
| Mått L1 / L2 / Z1: | 39 / 42 / 14 mm |
| Vikt: | 17 g |
Produktbetyg
Bli den första som publicerar en artikel till denna post!
Diskussion
Bli den första som publicerar en artikel till denna post!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
