Mellanflänsspjäll WAFER J9 IVAR BRA.J9.121 DN 100 (J9.121.100) BRA.J9.121
Kod för översättningen: J9.121.100Relaterade produkter
Detaljerad beskrivning av produkten
Spjället J9.121.100 tillhör serien BRA.J9.121 från IVAR. Huset av segjärn skyddas av epoxibeläggning RAL 5002 och skivan av rostfritt stål arbetar mot en tätningsmanschett av NBR. Tillverkaren rekommenderar det för värme, klimat och fjärrvärme, vattendistribution och vattenberedning, industri och lantbruk, tryckluftsnät och brandsläckningsanläggningar.
Tekniska data
- Nominell storlek DN: 100
- Byggnadslängd: 52 mm
- Tryck mellan flänsarna: PN 16
- Tryck vid ledningens ände: PN 10
- Medietemperatur: −10 °C … +80 °C
- Husmaterial: segjärn EN GJS 400-15
- Skiva: rostfritt stål AISI 316
- Tätning: NBR
- O-ring: FKM (Viton®)
- Ytskydd: epoxibeläggning RAL 5002
- Fläns för manöverdon: ISO 5211 (tillval)
- Dricksvatten: ja, godkänd för dricksvatten
Spjället kan monteras i ledningen eller vid ledningens ände; vid änden gäller det lägre trycket PN 10. Den valfria flänsen enligt ISO 5211 gör det möjligt att komplettera med manuellt, elektriskt eller pneumatiskt manöverdon. På begäran finns även ett silikonfritt utförande. Montering och idrifttagning bör överlåtas till ett fackföretag.
Tekniska data
| Artikelnummer | J9.121.100 |
| Tillverkare | IVAR |
| Typ | BRA.J9.121 |
| Nominell storlek DN | 100 |
| Byggnadslängd | 52 mm |
| Tryck mellan flänsarna | PN 16 |
| Tryck vid ledningens ände | PN 10 |
| Medietemperatur | −10 °C … +80 °C |
| Husmaterial | segjärn EN GJS 400-15 |
| Skiva | rostfritt stål AISI 316 |
| Tätning | NBR |
| O-ring | FKM (Viton®) |
| Ytskydd | epoxibeläggning RAL 5002 |
| Fläns för manöverdon | ISO 5211 (tillval) |
| Dricksvatten | ja, godkänd för dricksvatten |
Vanliga frågor
Är spjället J9.121.100 lämpligt för ånga?
Nej, tillverkaren avser den inte för ånga. Den är främst avsedd för vatten och andra medier från −10 till +80 °C och upp till PN 16 mellan flänsarna.
Går det att komplettera spjället med ett manöverdon?
Ja. Tillverkaren anger en valfri fläns enligt ISO 5211 där manuella, elektriska och pneumatiska manöverdon kan monteras.
Kan spjället J9.121.100 sitta vid ledningens ände?
Ja, men med lägre tryck: vid ledningens ände gäller PN 10, mellan flänsarna PN 16.
Ytterligare parametrar
| Kategori: | BRA.J9.120 - vridspjällsventiler WAFER J9 - spjäll i rostfritt stål |
|---|---|
| Garanti: | 24 |
| Artikelnummer: | J9.121.100 |
| Tillverkare: | IVAR |
| Typ: | BRA.J9.121 |
| Nominell storlek DN: | 100 |
| Byggnadslängd: | 52 mm |
| Tryck mellan flänsarna: | PN 16 |
| Tryck vid ledningens ände: | PN 10 |
| Medietemperatur: | −10 °C … +80 °C |
| Husmaterial: | segjärn EN GJS 400-15 |
| Skiva: | rostfritt stål AISI 316 |
| Tätning: | NBR |
| O-ring: | FKM (Viton®) |
| Ytskydd: | epoxibeläggning RAL 5002 |
| Fläns för manöverdon: | ISO 5211 (tillval) |
| Dricksvatten: | ja, godkänd för dricksvatten |
Produktbetyg
Bli den första som publicerar en artikel till denna post!
Diskussion
Bli den första som publicerar en artikel till denna post!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
