Eshop roka 2025 s vykurovacou technikou

Övergångsböj 90° i rostfritt stål AISI 304 med invändig gänga IVAR.IVN430 15 mm – Rp 1/2″

Kod för översättningen: IVN430.1512
Inte betygsatt Information om betyg
185,62 kr –20 %
Prechodové koleno 90° z nerezu AISI 304 s vnútorným závitom IVAR.IVN430 15 mm – Rp 1/2″
185,62 kr –20 % 148,45 kr / st 120,69 kr exkl. moms Pris för åtgärden:
Internationell leverans
Beställningsvara (1-2 veckor)

Detaljerad information

Detaljerad beskrivning av produkten

Böjen IVAR.IVN430 (IVN430.1512) ändrar riktningen 90° och ansluter presskopplat rör 15 mm via invändig gänga Rp 1/2″ till armatur eller detaljer med utvändig gänga. Systemet i rostfritt stål AISI 304 med EPDM-tätning är avsett för slutna värme- och kylkretsar, solsystem, tryckluft och undertryckssystem, inerta och tekniska gaser, tekniska vätskor, industriella tillämpningar samt avlopps- och dagvatten.

Tekniska data

  • Rördimension: 15 mm
  • Gänga: Rp 1/2″
  • Fogtyp: pressning (PRESS)
  • Material: rostfritt stål AISI 304 (1.4301), EPDM-tätning
  • Märktryck: PN 16
  • Temperaturområde: −20 … +85 °C, max. +120 °C
  • Max. undertryck: −0,8 bar
  • Frostskyddsblandning: max. 50 %
  • Dricksvatten: ej lämplig

Fogen görs genom mekanisk pressning (pressbackar med kontur M). Detaljen är inte lämplig för dricksvatten. Låt ett fackföretag sköta monteringen och driftsättningen.

Tekniska data

ArtikelnummerIVN430.1512
TillverkareIVAR
TypIVAR.IVN430
Rördimension15 mm
GängaRp 1/2″
Fogtyppressning (PRESS)
Materialrostfritt stål AISI 304 (1.4301), EPDM-tätning
MärktryckPN 16
Temperaturområde−20 … +85 °C, max. +120 °C
Max. undertryck−0,8 bar
Frostskyddsblandningmax. 50 %
Dricksvattenej lämplig

Vanliga frågor

Är den här detaljen lämplig för dricksvatten?
Nej. Tillverkaren anger uttryckligen att rostfria systemet AISI 304 inte är lämpligt för dricksvatten; det är främst avsett för värme, kyla, solkretsar och tekniska ledningar.

Vad händer om fogen inte är pressad?
En opressad fog är otät. Upp till storlek 54 mm anger tillverkaren en pressindikering som visar att fogen är korrekt utförd.

Vilken gänga och rördimension har IVN430.1512?
Pressände för rör 15 mm och invändig gänga Rp 1/2″.

Ytterligare parametrar

Kategori: IVAR.IVN30, IVN31, IVN34 - vinklar 90° med gängor
Garanti: 2 år
Artikelnummer: IVN430.1512
Tillverkare: IVAR
Typ: IVAR.IVN430
Rördimension: 15 mm
Gänga: Rp 1/2″
Fogtyp: pressning (PRESS)
Material: rostfritt stål AISI 304 (1.4301), EPDM-tätning
Märktryck: PN 16
Temperaturområde: −20 … +85 °C, max. +120 °C
Max. undertryck: −0,8 bar
Frostskyddsblandning: max. 50 %
Dricksvatten: ej lämplig

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.