Eshop roka 2025 s vykurovacou technikou

Skyddsanod från magnesiumlegering med galvaniserad stopp - 6/4"x700 mm; f.n. 32 mm; 800-5000 l IVAR.AM5

Kod för översättningen: 4000215
Inte betygsatt Information om betyg
1 032,04 kr –20 %
Vykurovacia technika Ochranná anóda z horčíkovej zliatiny s pozink. zátkou - 6/4"x700mm; pr. 32mm; 800-5000l
1 032,04 kr –20 % 825,64 kr / st 671,25 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

IVAR.AM5

  • IVAR.AE - elektronisk anod
  • IVAR.AM - strömavledande skyddsanod av magnesiumlegering med galvaniserad stopfläns
  • IVAR.AM - strömavledande skyddsanod av magnesiumlegering med galvaniserad stopfläns och kontrollutrustning

Vanliga frågor

  • Hur kan jag bekräfta att denna produkt är lämplig för mitt system? Jämför storlek, material och tekniska specifikationer som anges i beskrivningen med kraven från ditt specifika system. Vid oklarheter, vänligen kontakta oss med en exakt beskrivning av ditt anslutningssystem.
  • Måste installationen utföras av en yrkesman? Vid enklare arbetsuppgifter kan installationen utföras av en skicklig hobbyist, men vid arbeten inom gas-, el- eller tryckledningar rekommenderar vi alltid att en yrkesman utför arbetet.

Ytterligare parametrar

Kategori: Skyddsanoder
Tillgänglighet: I lager eller hos leverantören
Senaste prisuppdatering: 13.04.2026 1:03:04

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

M Författarens avatar 19.11.2026 13:18
Tengo un termo de agua de los normales, de esos de 100 litros más o menos, y no sé si esta pieza me vale o si es para cosas más grandes tipo depósitos de calefacción. ¿Alguien me puede explicar si sirve para mi caso o es demasiado grande?
A Författarens avatar 19.11.2026 13:18
Este ánodo está pensado para depósitos de entre 800 y 5000 litros, así que para un termo de 100 litros se queda muy por encima de lo que necesita. Para calentadores domésticos normales suele usarse un ánodo más pequeño, así que le recomendamos mirar en la categoría de ánodos de protección otras medidas más ajustadas a su termo. Si nos indica la marca y modelo de su termo, podemos orientarle mejor por e-mail.
A Författarens avatar 04.11.2026 07:38
I have a big water heater and I'm not sure if this magnesium rod with the zinc plug will fit my tank, since it looks like it's for tanks between 800 and 5000 liters.
A Författarens avatar 04.11.2026 07:38
Yes, this anode is designed specifically for systems holding from 800 up to 5000 liters of water. You just need to check that your tank matches these size limits and that you can fit the 700mm length inside. If you are unsure about the setup, feel free to email us with the details so we can help you decide.
G Författarens avatar 20.08.2026 08:56
Jó napot, egy 1200 literes ipari melegvíz-tároló berendezéséhez keresek védőanódát, és szeretném megkérdezni, hogy ez a 6/4"-os, 700 mm hosszú, 32 mm átmérőjű magnéziumötvözet anóda valóban megfelelő lehet-e erre a célra, figyelembe véve, hogy a termék leírása szerint 800–5000 literes tartályokhoz ajánlott. Esetleg szükséges-e valamilyen különleges szerszám a beépítéshez, vagy elegendő egy hagyományos csőkulcs?
A Författarens avatar 20.08.2026 08:56
Igen, az 1200 literes tartályhoz ez az anóda teljesen megfelelő, hiszen pont belül van a 800–5000 literes tartományban. A beépítéshez általában egy normál csőkulcs is elegendő, a 6/4"-os pozinkozott záródugó szabványos menetes csatlakozást biztosít. Ha bizonytalan a csere időzítésével kapcsolatban, érdemes időnként ellenőrizni az anóda állapotát, mivel az élettartam a vízminőségtől is függ.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.