Eshop roka 2025 s vykurovacou technikou

T-arm 90° PRESS GAS - reducerad - 54-35-54 mm IVAR.IVN41 GAS

Kod för översättningen: IVNGAS41.543554
Inte betygsatt Information om betyg
543,77 kr –20 %
Vykurovacia technika T-kus 90° PRESS GAS - redukovaný - 54-35-54mm
543,77 kr –20 % 434,99 kr / st 353,65 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

T-kus 90° PRESS GAS - reducerad - 54-35-54mm

  • PN 5, T = -20 °C till +70 °C
  • T-kus 90° reducerad PRESS x PRESS x PRESS
  • användning: för ledningar av naturgas, biogas och propan i flytande form
  • material: rostfritt stål Wst. Nr. 1.4404 (AISI 316L), tätning O-ring HNBR gult
  • godkänt av SZÚ Brno, DVGW

Obs: Dimensioner på rördelar PRESS GAS 76,1, 88,9 och 108 mm på beställning.

Vanliga frågor

  • Vilket verktyg behövs för installation av denna rördel? Pressfytade rördelar kräver specialiserade pressklämmor med rätt typ av käke (ofta betecknad B, F eller TH enligt systemet) som motsvarar storleken och typen av rördel – utan rätt verktyg kan anslutningen inte skapas eller kontrolleras.
  • Hur vet jag att anslutningen är korrekt pressad? Kvalitativa pressfytade rördelar har en pressindikator (t.ex. tätning O-ring, som vid ofullständig pressning läcker) – innan förankring i vägg eller betonggolv är det alltid nödvändigt att utföra ett trycktest på hela systemet.
  • Kan anslutningen tas isär efter pressning? Nej, till skillnad från skruvanslutningar är en pressanslutning permanent och dess återtagande kräver att rördelen skärs av och ersätts med en ny.
  • Måste installationen utföras av en yrkesman? Ja, pressning av rördelar kräver yrkesmässig färdighet och korrekt kalibrerat verktyg – vi rekommenderar att uppdraget lämnas till värmesystemtekniker/elektriker, särskilt vid anslutningar som kommer att förankras i vägg eller betonggolv utan möjlighet till senare kontroll.

Ytterligare parametrar

Kategori: IVAR.IVN41 GAS - reducerade T-rör 90° PRESS GAS
Tillgänglighet: I lager eller hos leverantören
Senaste prisuppdatering: 13.04.2026 1:07:27

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

P Författarens avatar 07.10.2026 13:20
I need to connect a 54mm gas pipe to a 35mm one using this fitting, but I'm not sure if the stainless steel and O-ring materials are suitable for propane gas phase systems.
A Författarens avatar 07.10.2026 13:20
Yes, this T-piece is specifically designed for natural gas, biogas, and propane gas phase piping systems. It is made of AISI 316L stainless steel with a yellow HNBR sealing O-ring that meets all necessary certifications for this purpose.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.