Eshop roka 2025 s vykurovacou technikou

Underloppskulvert med fjärrstyrd möjlighet - FASTEC Quick; DN 20 – KAMPANJ IVAR.K4.1 E-READY

Kod för översättningen: K401BF30200
Akcia
Inte betygsatt Information om betyg
1 569,20 kr –10 %
Vykurovacia technika Podomietkový guľový uzáver s možnosťou vzdialeného ovládania - FASTEC Quick; DN 20 - akcia
1 569,20 kr –10 % 1 412,30 kr / st 1 148,21 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

  • PN 10, T = +95 °C
  • anslutsystemet FASTEC® Quick, F 13 för storleken DN 15
  • anslutsystemet FASTEC® Quick, F 14 för storleken DN 20
  • inklusive installationslåda utan lock
  • styrning med servomotor IVAR.E 104
  • material: Messing CW617N, kula tekniskt polymer, låda PS

Vanliga frågor

  • Hur väljer jag rätt typ och storlek på armatur/ventil? Följ det nömnvärda trycket (PN) och arbets temperaturen (T) som anges i tekniska specifikationer - de måste motsvara eller överstiga de verkliga arbetsvillkor i ditt system, och anslutningsstorleken måste matcha rörets diameter.
  • Hur fungerar denna armatur/ventil? Den exakta funktionsprincipen (stängning, tryckreglering, återställning osv.) beror på den specifika typen - en detaljerad beskrivning av funktionen finns ovanför detta produkt.
  • Måste installationen utföras av en yrkesman? Vid enklare stängarmaturer kan installationen utföras av en hobbyman, vid reglerings- och säkerhetsarmaturer (säkerhetsventiler, tryckmätare) rekommenderar vi alltid en yrkesman, eftersom det gäller komponenter med säkerhetsfunktion.

Ytterligare parametrar

Kategori: kulventiler för inbyggnad
Garanti: 24
Tillgänglighet: I lager eller hos leverantören
Senaste prisuppdatering: 03.04.2026 1:16:43

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

R Författarens avatar 14.11.2026 15:33
Buongiorno, ho un tubo da 20mm e vorrei montare questa valvola FASTEC Quick per il riscaldamento. Secondo le specifiche la PN 10 va bene per la mia caldaia che arriva a 95°C, giusto? Serve per forza un tecnico per l'installazione o posso farcela da solo?
A Författarens avatar 14.11.2026 15:33
Ciao Riccardo, sì, le specifiche indicano proprio che la pressione nominale (PN 10) e la temperatura massima (+95 °C) sono adatte al tuo sistema se i valori reali non superano questi limiti. Per quanto riguarda il montaggio, dato che si tratta di una valvola di chiusura semplice, potresti provarci anche tu, ma per sicurezza ti consiglio di farti aiutare da un tecnico esperto in impianti idraulici.
D Författarens avatar 23.10.2026 14:20
Má tento kohout DN 20 skutečně připojovací systém F14 a dá se k němu použít servopohon IVAR.E 104, nebo je to jen pro menší rozměry?
A Författarens avatar 23.10.2026 14:20
Ano, u velikosti DN 20 je součástí balení přímo příslušenství F14 pro připojení. Servopohon IVAR.E 104 je kompatibilní a produkt umožňuje vzdálené ovládání právě tímto pohonem. Materiál těla je mosaz CW617N a koule technopolymér, takže odpovídá provozním teplotám do 95 °C.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.