Eshop roka 2025 s vykurovacou technikou

Nästa - med inre tråd - rostfritt stål AISI 316 - 22 mm-Rp3/4" IVAR.IVN32

Kod för översättningen: IVN32.2234
Inte betygsatt Information om betyg
362,28 kr –19 %
Vykurovacia technika Nástenka - s vnútorným závitom - nerez AISI 316 - 22mm-Rp3/4"
362,28 kr –19 % 289,87 kr / st 235,67 kr exkl. moms Pris för åtgärden:
Internationell leverans
I lager hos leverantören

Detaljerad information

Detaljerad beskrivning av produkten

  • PN 16, T = -20 °C till +85 °C - max. +120 °C
  • väggfläns med inre press x tråd
  • användningsområde: för sanitära installationer, sprinklersystem,
    uppvärmningssystem, tryckluft, solsystem, inerta gaser och industri
  • material: rostfritt stål klass Wst. Nr. 1.4404 (AISI 316L), packning EPDM

Obs: Slätning krävs för att undvika läckage, samt indikator för slätning upp till 54 mm.

 

Vanliga frågor

  • Till vad är detta rör avsett? Exakt användning (vattenledningar, uppvärmning, gas, solsystem, komprimerad luft m.m.) finns i produktdeskriptionen och tekniska specifikationer – olika material (rostfritt stål, kolsamt) har olika korrosionsbeständighet och olika medier de är certifierade för.
  • Hur kopplas detta rör? Vanligtvis genom press- eller svetsförbindelser, beroende på system och diameter – använd kompatibla rördelar av samma system.
  • Måste installationen göras av en yrkesman? Ja, särskilt vid gas- eller tryckluftinstallationer eller vid svetsförbindelser, är installationen reserverad till personer med lämplig yrkeskompetens.

Ytterligare parametrar

Kategori: IVAR.IVN32, IVN33 - väggvinklar - med invändig gänga
Tillgänglighet: I lager eller hos leverantören
Senaste prisuppdatering: 26.05.2026 8:49:05

Produktbetyg

Bli den första som publicerar en artikel till denna post!

Fyll inte i detta fält

Hur skulle du betygsätta den här produkten? Välj 1 till 5 stjärnor, där 1 är det sämsta och 5 är det bästa betyget.

Diskussion

Fyll inte i detta fält

Lista över diskussioner

S Författarens avatar 09.11.2026 13:55
Does the thread need teflon tape or is the EPDM O-ring enough on its own? Also, is this safe to just screw on without crimping the press side?
A Författarens avatar 09.11.2026 13:55
The Rp3/4" thread side needs your standard sealing (tape or paste) as usual, the O-ring is just for the press connection, not the thread. And no - the press side isn't leak-tight until it's properly crimped, that's why it has the crimp indicator up to 54mm, so don't rely on it being screwed on only. Use a press tool compatible with this fitting size and you're good to go.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.